Home  >  Venturi Air Gas Mixers

 

Tejas Smokers® has designed two efficient venturis.  A venturi is used to mix air and gas before it goes to a burner.  Burners can be a remote cast iron burner or a pipe burner.  One venturis has a 3/4" Female National Pipe Thread Taper gas outlet and the other venturi has a 1 1/4" FNPT outlet for larger gas volumes. Either can be used with low or high gas pressures depending on the orifice chosen.

 

HPGX-1 -  3/4" Cast Iron Venturi with an air shutter, Insect Screen Guard, and a 90° 3/8" gas flare orifice fitting  

  HPGX-1

HPGX-1  3/4" Cast Iron Venturi air shutter, with Insect Screen Guard, and a 90° 3/8" gas flare orifice fitting.  For use with high or low pressure with the appropriate orifice fitting size.
 

  • The flat top surface is 3" in diameter by 1 1/2" in height.

  • The height of the venturi with an orifice is approximately 3".

  • Includes an air shutter, Insect Screen Guard, and a 90° 3/8" gas flare orifice fitting.  A 180° 3/8" gas flare orifice fitting is also available. Ask.
     

  • For High Pressure use we recommend the COM3 regulator/hose

  • For Low Pressure use we recommend the COM5 regulator/hose

  • Also available with an Optional CVO (Control Valve Orifice),  or the Optional T-PILOT Assembly

  • Comes with a #61 orifice for High Pressure Propane, OR specify your fuel, and we will custom drill your orifice at no extra charge.
     

Weight 12 oz. Free shipping within the 48 contiguous U.S. States.
 

  • 3/4in Female NPT Cast Iron Venturi

    3/4" Female NPT

  • 3/4in Female NPT Cast Iron Venturi

    HPGX-1 with Optional CVO (Control Valve Orifice)

  • HPGX-1 with Optional T-PILOT Assembly

    HPGX-1 with Optional T-PILOT Assembly

 

$29.95

 

 

HPMAX-1   1 1/4" Cast Iron MONSTER Venturi   

  HPMAX-1

HPMAX-1 1 1/4" Cast Iron MONSTER Venturi. Often used with a black drilled pipe or pipe nipple (pipe burner) that is capped off or in a variety of special applications where the air and gas mixture is being sent to the burner.

  • It has a 1 1/4" Female Normal Pipe thread outlet.
  • The flat top surface is 4" in diameter by 2 1/2" in height.
  • The height of the venturi with an orifice is approximately 4".
  • Includes an air shutter, Insect Screen Guard and a 90° 3/8" flare Orifice Alternatively, a 180° 3/8" flare orifice fitting is also available. Ask.

Weight 2# 2 oz. Free shipping within the 48 contiguous U.S. States.


  • 1 1/4in Female NPT Cast Iron MONSTER Venturi

    1 1/4" Female NPT

  • 1 1/4in Female NPT Cast Iron MONSTER Venturi

    HPMAX-1 with Optional Control Valve Orifice

 

$68.95

 

 

Venturis are shipped free of freight charges daily to North Carolina, South Carolina, Georgia, Florida, Washington, California, and all contiguous U.S. States.  We ship to all countries in the world, including Canada and Australia on a daily basis.