Home  >  High Pressure Burners

 

Tejas Smokers® High Pressure Burners are generally defined by delivering more than one psi of propane gas.  We recommend the use of our 20 psi regulator, the COM3, with all of our high pressure burners.

 

 

HPOCA4 - High Pressure Cast Iron Burner with 4" Neck

  HPOCA4

HPOCA4 - High Pressure Cast Iron Burner with a shorter 4" Neck

  • Produces up to 160,000 BTU/hr in an evenly-directed manner.
  • Includes air shutter, Insect Screen Guard, and a 90° 3/8" flare Orifice.Alternatively, a 180° 3/8" flare orifice fitting is also available.
  • Best working distance is 3" to 4" from top of cast to bottom of pot.
  • The center bolt is a 6mm in diameter or a 1/4".
  • From the center bolt to the air inlet at the edge of the burner is 5".
  • Best working distance is 3" to 4" from top of cast to bottom of pot.
  • From the center bolt to the end of the orifice is approximately 6".
  • Total length of the burner with an orifice is approximately 8".
  • Burner head diameter is 4", height from base to top of burner is 3".

Weight 3# 13 oz. Free shipping within the 48 contiguous U.S. States.


  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck
  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck

HPOCA4 with Optional Control Valve Orifice Bottom side view of the HPOCA4

  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck
  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck

Bottom side view of the HPOCA4

HPOCA4 with Optional T-PILOT

 

$34.95

 

 

HPB6 - High Pressure Cast Iron Burner with 6 inch Neck

  HPB6

HPB6 - High Pressure Cast Iron Burner with 6" Neck.

  • Produces up to 160,000 BTU/hr in an evenly-directed manner.
  • Includes an air shutter, Insect Screen Guard and a 90° 3/8" flare Orifice.Alternatively, a 180° 3/8" flare orifice fitting is also available. Ask.
  • Best working distance is 3" to 4" from top of cast to bottom of pot.
  • Center bolt is 10mm in diameter, very strong and ideal for rugged use.
  • From the center bolt to the air inlet at the edge of the burner is 6 1/4".
  • From the center bolt to the end of the orifice is approximately 7 1/2".
  • Total length of the burner with an orifice is approximately 10".
  • Burner head diameter is 4", height from base to top of burner is 3".

Weight 3# oz. Free shipping within the 48 contiguous U.S. States.


  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck
  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck

HPB6 with Optional Control Valve Orifice

  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck
  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck

Bottom side view of the HPB6

  • HPB6 burner with PILOT attached

HPB6 with Optional T-PILOT Assembly

 

$34.95

 

 

HPCAST6 - High Pressure Cast Iron Burner with 6 inch Neck

  HPCAST6

HPCAST6 - High Pressure Cast Iron Burner with a 6" Neck.

  • Produces up to 160,000 BTU/hr in an evenly-directed manner.
  • Includes an air shutter, Insect Screen Guard and a 90° 3/8" flare Orifice. Alternatively, a 180° 3/8" flare orifice fitting is also available.
  • Best working distance is 3" to 4" from top of cast to bottom of pot.
  • The center bolt is a 6mm in diameter or a 1/4".
  • From the center bolt to the air inlet at the edge of the burner is 6 1/2"
  • From the center bolt to the end of the orifice is approximately 7 1/2"
  • Total length of the burner with an orifice is approximately 10".
  • Burner head diameter is 4", height from base to top of burner is 3"

Weight 3# 8 oz. Free shipping within the 48 contiguous U.S. States.


  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck
  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck

HPCAST6 with Optional Control Valve Orifice

  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck
  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck

Bottom side view of the HPCAST6

  • 160,000 BTU/hr High Pressure Cast Iron Burner with Pilot Assembly
  • 160,000 BTU/hr High Pressure Cast Iron Burner with Pilot Assembly

HPCAST6 with Optional T-PILOT Assembly

 

$34.95

 

 

HPGX-2 - High Pressure Two-Part Cast Iron Burner - Adjustable Length Neck 

  HPGX-2

HPGX-2 - Two-Part Cast Iron Burner with Adjustable Length Neck.

  • Produces up to 160,000 BTU/hr in an evenly-directed manner.
  • Burner is ideal for applications where venturi is placed outside or farther away from the area where the burner is installed.
  • Distance between burner head and venturi is determined by the length of 3/4" black pipe nipple used. Pipe nipple is NOT included.
  • Best working distance is 3" to 4" from top of cast to bottom of pot.
  • Burner head and venturi have 3/4" female normal pipe thread inlets.
  • Includes an air shutter, Insect Screen Guard, and a 90° 3/8" flare Orifice A 180° 3/8" flare fitting is also available upon request. Ask.
  • The center bolt is a 10mm in diameter in the burner head.
  • Burner head diameter is 4", height from base to top of burner is 3".

Weight 3# 10 oz. Free shipping within the 48 contiguous U.S. States.


  • 160,000 BTU/hr Two-Part Cast Iron Burner with Adjustable Length Neck
  • 160,000 BTU/hr Two-Part Cast Iron Burner with Adjustable Length Neck

HPGX-2 with Optional Control Valve Orifice

  • 160,000 BTU/hr Two-Part Cast Iron Burner with Adjustable Length Neck

    Bottom side view of the HPGX-2

  • 160,000 BTU/hr Two-Part Cast Iron Burner with Adjustable Length Neck

    HPGX-2 Performance

  • HPGX-2 with Optional T-PILOT Assembly

HPGX-2 with Optional T-PILOT Assembly

 

$59.95

 

 

HPMAX-2 - High Pressure  MONSTER 2-Part Burner - Adj. Length Neck               OUT OF STOCK

  HPMAX-2

HPMAX-2 - MONSTER Two-Part Cast Iron Burner with Adjustable Length Neck.

  • Produces up to 225,000 BTU/hr in an evenly-directed manner.
  • This monster unique burner is ideal for applications where the venturi is
  • placed outside or farther away from the area where the burner is placed
  • Distance between burner head and venturi determined by length of the 1 1/4" black pipe nipple used. Pipe nipple is NOT included.
  • Best working distance is 5" to 6" from top of cast to bottom of pot.
  • Burner head and venturi have 1 1/4" female normal pipe thread inlets.
  • Includes air shutter, Insect Screen Guard, and a 90° 3/8" flare Orifice. A 180° 3/8" flare fitting is also available. Ask. No extra charge.
  • The center bolt is a 10mm in diameter in the burner head.
  • Burner head diameter is 6", height from base to top of burner is 6".

Weight 9# 6 oz. Free shipping within the 48 contiguous U.S. States.


  • 225,000 BTU/hr MONSTER Two-Part Cast Iron Burner with Adjustable Length Neck

    HPMAX-2 with Optional CVO250

  • 225,000 BTU/hr MONSTER Two-Part Cast Iron Burner with Adjustable Length Neck

    Bottom side view of the HPMAX-2

  • Comparative flame outputs of the HPMAX-2 and the HPGX-2
  • Comparative flame outputs of the HPMAX-2 and the HPGX-2

Comparative flame outputs of the HPMAX-2 and the HPGX-2

  • HPMAX-2 burner with PILOT

HPMAX-2 with Optional T-PILOT Assembly

 

 

INSECT1 -  Insect Guard Screen, 2 1/2" Diameter

  INSECT1

INSECT1 - Insect Guard Screen, 2 1/2" Diameter Small Screen

  • The screen helps prevent insects from nesting inside cast iron burner, in the air inlet.  It is standard on the following burners that we stock:

HPOCA4, HPB6, HPCAST6, HPGX-1, HPGX-2, LPCAST, LPCAST-2, GRILL-2

  • If you are purchasing a burner from us then there is no need to purchase a Insect Guard since is already included in the burner.
  • Diameter of Insect Guard is approxiately 2 1/2".

Wt. 1 oz. Free shipping within the 48 contiguous U.S. States.

$2.95

 

 

INSECT2 - Large  Insect Guard Screen, 3 1/2" Diameter

  INSECT2

INSECT2 - Large Insect Guard Screen, 3 1/2" Diameter Large Screen

  • The screen helps prevent insects from nesting inside cast iron burner, in the air inlet. It is standard on the following burners that we stock:

HPMAX-1, HPMAX-2, LPCAST8-2, LPCAST10, LPCAST10-2, LPCAST12-2

  • If you are purchasing a burner from us then there is no need to purchase a Insect Guard since is already included in the burner.
  • Diameter of Insect Guard is approxiately 3 1/2".

Wt. 1 oz. Free shipping within the 48 contiguous U.S. States.

$2.95

 

 

Our Cast Burners are popular with home brewers because they work dependably right from the start.  The castings are clean and don't leak. Poor quality, cheap castings can end up costing a lot of time, money, damage, and aggravation.  High quality Propane Cast Burners from Tejas Smokers®  burners simply work well because they are well designed, well fabricated, and individually well-tested before shipping.  Our burners are shipped free to North Carolina, South Carolina, Georgia, Mississippi, Tennessee, Louisiana and all the other 48 contiguous U.S.States.